Two Replacement 1930s web

[softball66]

I've just listed these two 1930s webs saved from beater gloves that might work for that period's gloves.

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 500wt_1182

If you're looking for replacement webs for 1930s fielders glove that are missing these webs, this pair of that era's gloves might work for you. One is a "T" web approximately 3 inches tall and 3 inches wide on the widest upper portion. It is a two-tunnel laced web with the top running horizontally and the descender portion lacing tunnels run vertically. The whole web is a single sewn die-cut piece. The slight discoloration on this web, as shown in the photo, has been corrected somewhat and the other side of this web is clean of such a problem. The other web is an I web that runs approximately 3 1/2 inches wide at the top and 3 1/2 inches from top to bottom. The two horizontal pieces contain double tunnels for the lacing. The connecting vertically portion connects thru the horizontal lace on the top and bottom pieces. These would be handy to fill the missing web gaps on otherwise nice 1930s fielders gloves