"Gitt Along Little Dogies"

Anything related to gloves (pre-1970) you can post here.

"Gitt Along Little Dogies"

Postby mikesglove » July 17th, 2017, 1:56 am

19th century glove manufacturers used the leather cutout patterns of men's hand and work gloves of the period for baseball gloves. Some of these glove patterns were well established and other pattern innovations blossomed in the 1870's-80's. One of the older and most popular designs was for a glove with sidewalls or fourchettes, which means "forks". Below is an 18th century advertisement. The fourchettes gave the finger stalls dimension.
Image

Below is a hand glove showing the fourchettes.
Image

The 19th century baseball glove below shows a one piece palm and one piece back joined by fourchettes. Note the finger seams on the front and back.
Image

The "Plymouth" glove was developed in the Northeast in the early 1800's. The pattern features a one piece palm and finger segments on the back.
Image

The design was wildly popular in its day and was the basis for many early baseball gloves. The main downside was the placement of the vulnerable finger seams toward the front of the glove.
Image
Image

Daniel Gunn had a solution to the finger seam problem of the Plymouth pattern with this 1888 patent. The back of the glove was one piece and the palm had a transverse seam across the middle two fingers. The finger stall seams were toward the back of the glove.
Image

The reason for the transverse seam is evident in the patent drawing below. The first and pinky finger stalls were cut so full that there was no room to fit the middle two fingers in between and they had to be attached separately.
Image

It is my belief that the Joseph Sauers patent glove of 1888 below was cut using the Gunn pattern.
Image

In baseball terms, the down side to the Gunn pattern was the front transverse finger seam right near the pocket. The Sauer's design got around that by wrapping the front of the glove with chinchilla leather and padding. there were improvements to the Gunn patent through the years such as double stitching of the transverse seam. One novel idea came from George Gitt in 1908. His patent added a tongue or strap of leather to the transverse seam to better lock it in place.
Image

below is an advertisment featuring his patent invention.
Image

George Gitt was owner of The Hanover Glove Factory in Hanover PA. The company was established in 1848 and made all sorts of gloves, eventually even for sports. The Handball glove below was from a listing of the "http://www.antiqueathlete.com
Image
Image

The baseball glove below features the Gitt patent seam.
Image

You can just make out the reinforcing strap poking out between the middle two fingers.
Image
User avatar
mikesglove
Hall of Famer Glove Poster
 
Posts: 3693
Joined: July 11th, 2010, 1:27 pm

Re: "Gitt Along Little Dogies"

Postby okdoak » July 18th, 2017, 7:19 pm

Neat information as always, Mike.
User avatar
okdoak
Hall of Famer Glove Poster
 
Posts: 925
Joined: October 11th, 2008, 5:27 pm

Re: "Gitt Along Little Dogies"

Postby mikesglove » July 19th, 2017, 1:06 pm

Thanks Greg.
A tornado blew the roof off the Hanover Glove Factory in 1915. At that time it was a two story building.
Image

It was rebuilt as a three story building soon after. Below is a present day photo of the The Hanover Glove Factory. Notice the darker brick of the third floor. The building is now being used by some other business.
Image

Below is an ad from the 1960's.
Image
User avatar
mikesglove
Hall of Famer Glove Poster
 
Posts: 3693
Joined: July 11th, 2010, 1:27 pm


Return to Vintage Glove Discussion

Who is online

Users browsing this forum: No registered users and 35 guests