glove mallet

Share your bats, catchers equipment, trophies, pinbacks, pennants, etc., discuss sports or other collecting interests

glove mallet

Postby glovin » December 7th, 2008, 4:49 am

hey...anybody got an extra glove mallet lying around that they're willing to get sell?...i would prefer a wooden one, like the ones made by nokona but i don't want to pay 35 dollars for one
glovin
Veteran Glove Poster
 
Posts: 60
Joined: October 18th, 2008, 8:26 am
Location: san diego california

With very little effort

Postby drzubia8 » December 7th, 2008, 5:06 am

you can make your own glove mallet. It was the topic of one of the discussions on this forum.
"It's what you learn after you know it all that counts" - Earl Weaver
User avatar
drzubia8
Veteran Glove Poster
 
Posts: 150
Joined: May 15th, 2008, 9:50 pm

Postby glovin » December 7th, 2008, 5:20 am

i did...but after a while, the ball would fall of the dowel :(
glovin
Veteran Glove Poster
 
Posts: 60
Joined: October 18th, 2008, 8:26 am
Location: san diego california

Postby awarsoca » December 8th, 2008, 7:28 am

http://www.yennacocustomgloves.com/ycgload.html
Works like a charm. There wasn't much difference in weight with the Nokona mallet
User avatar
awarsoca
Gold Glove Poster
 
Posts: 305
Joined: April 26th, 2007, 9:53 am
Location: Columbia, SC

Postby glovin » December 8th, 2008, 10:16 am

awarsoca wrote:http://www.yennacocustomgloves.com/ycgload.html
Works like a charm. There wasn't much difference in weight with the Nokona mallet


THANKS...that's perfect!!! :D
glovin
Veteran Glove Poster
 
Posts: 60
Joined: October 18th, 2008, 8:26 am
Location: san diego california

Postby awarsoca » December 8th, 2008, 11:38 am

hehe I can't take credit for it, another member posted it this past spring and I got one for Father's Day
(c;
User avatar
awarsoca
Gold Glove Poster
 
Posts: 305
Joined: April 26th, 2007, 9:53 am
Location: Columbia, SC

Postby jackdaddy » December 8th, 2008, 11:38 pm

I just ordered one for Christmas as a gift to "myself".
jackdaddy
Rookie Glove Poster
 
Posts: 21
Joined: May 9th, 2008, 9:55 am

Postby spedrunr » December 30th, 2008, 12:25 pm

glovin wrote:i did...but after a while, the ball would fall of the dowel :(


try a deck screw (i drove it a little too deep)

Image
Image
spedrunr
Hall of Famer Glove Poster
 
Posts: 528
Joined: November 25th, 2006, 3:16 am
Location: chandler, AZ

Re: glove mallet

Postby Pina » August 18th, 2010, 3:50 am

I know this is old but... you can also use epoxy, I made one by drilling a ball, filling it with epoxy and letting it dry for about six hours. Its rock solid.
Pina
Rookie Glove Poster
 
Posts: 5
Joined: August 15th, 2010, 5:15 pm
Location: Bay Area


Return to Not a Glove But Still Cool

Who is online

Users browsing this forum: No registered users and 15 guests

cron